OEM Sage Green Jersey Nightdress with Lace Hem and Button Front





| Share | |
|---|---|
| Categories | Women's Nightgowns |
| Brand | KoalaPurr |
| Product Specifications | KP-WS-WN-014 |
| Fabric | Cotton Modal Jersey |
| Fabric Type | Single Jersey Knit |
| Color | Sage Green / Custom Colors |
| Neckline | Round Neck with Contrast Binding |
| Closure | Full Button Front, Eleven Buttons |
| Sleeve | Long Sleeve with Lace Cuff |
| Hem | Scalloped Lace Trim |
| Length | Knee Length |
| Fit | Relaxed, Straight Through the Body |
| Trim | Fine Scalloped Lace at Cuff and Hem |
| MOQ | 100 pcs per color per style |
| Service Type | OEM / ODM / Private Label |
| Season | All Season |
OEM Sage Green Jersey Nightdress with Lace Hem and Button Front
A knee-length nightdress in a sage green cotton modal jersey, opening the full length of the front on eleven small buttons, with a bound round neckline, lace at the cuff and a scalloped lace border at the hem. A button-front nightdress is a different engineering problem from a pull-on one, because the front has to open flat and still hang straight when it is closed. On a jersey the placket is the weak point: the knit stretches under the button stand, the buttonholes migrate, and the front gapes at the bust within a few washes. We fuse a 12 mm knit-friendly tape down the placket before the buttonholes are worked and set the buttons on a 9 cm spacing, which is the interval that keeps a relaxed jersey closed without pulling. The neckline is bound in a fine contrast tape rather than faced, so the opening keeps its shape when the garment is worn open. The binding is applied in one pass and the ends are mitred into the placket, which is where a bound neck either looks considered or looks improvised. The lace is a scalloped galloon, applied at the hem over a narrow turned edge so the scallop sits below the stitch line instead of being cut into it, and the same lace is set into the cuff seam so the wrist finishes in the same language as the hem. Shown in sage green with ivory lace; ground shade, lace width and placket length can all be redeveloped.
Placket Stability, Bound Neckline & Applied Lace
The whole garment depends on the placket behaving. Jersey wants to stretch along the button stand, so the tape goes on first, the buttonholes are worked second, and the buttons are sewn last against a finished sample rather than against a measurement. Buttons are a matte four-hole resin with a cross stitch and a short shank, so the front sits flat when closed and does not dimple between holes. The neckline is bound, not faced. A faced neckline on a jersey rolls out after washing because the facing has no support; a bound neck holds because the tape carries the curve. We cut the binding on the bias, stretch it only enough to sit flat around the curve, and mitre both ends into the placket so there is no step where the binding meets the button stand. The hem lace is a scalloped galloon applied over a 6 mm turned edge. The scallop has to hang free of the stitch line, otherwise the points read as a frayed edge rather than as lace, and the hem is pressed on a padded board so the scallop is not flattened into the fabric. The same lace is inserted into the cuff seam rather than applied on top, which keeps the cuff soft against the wrist. Shown in sage green; lace width, ground colour and sleeve length are all open to change.
- Placket fused with knit-friendly tape before buttonholes are worked.
- Buttons set on a 9 cm spacing so a relaxed jersey closes without gaping.
- Bound round neckline that holds its shape when the front is worn open.
- Scalloped galloon lace applied over a turned hem, points left free.
- Same lace inserted into the cuff seam, not applied on top of it.
- Knee length cut to clear the knee when seated.
- Custom fabrics accepted — see our sleepwear fabric library.
Key Features — Why Choose This Button-Front Nightdress
Cotton modal jersey with enough weight to hang straight, not cling.
Full button front that opens flat for dressing and nursing use.
Bound neckline in contrast tape, mitred into the placket at both ends.
Scalloped lace at the hem and in the cuff seam, matched in width.
Eleven-button placket on a fused stand so the front stays closed.
Ground shade, lace and placket length all redevelopable.
Product Specifications
Ready to Build Your Private Label Sleepwear Line?
Send us the ground shade and the lace width you want to work with, and we will come back with jersey weights, placket options and a lace placement plan for this nightdress.
- 加载中···
Request a Quote
- *Phone
- *Title
- *Content






