Private Label Navy Modal Sleep Shirt with White Piping and Pocket





| Share | |
|---|---|
| Categories | Women's Sleep Shirts |
| Brand | KoalaPurr |
| Product Specifications | KP-WS-WS-006 |
| Fabric | Modal Jersey |
| Fabric Type | Single Jersey Knit |
| Color | Navy / Custom Colors |
| Collar | Notch Collar with White Piping |
| Closure | Five-Button Front |
| Sleeve | Long Sleeve with Piped Cuff |
| Chest Patch Pocket with Piped Mouth | |
| Length | Mid-Thigh |
| Hem | Curved Shirttail Hem |
| Trim | White Piping at Collar, Placket, Pocket and Cuff |
| Fit | Relaxed |
| MOQ | 100 pcs per color per style |
| Service Type | OEM / ODM / Private Label |
| Season | All Season |
Private Label Navy Modal Sleep Shirt with White Piping and Pocket
A mid-thigh sleep shirt in a navy modal jersey, with white piping running the collar edge, the placket, the pocket mouth and the cuff, five white buttons and a curved shirttail hem. The design is one contrast line against a dark ground, which is the least forgiving version of piping there is: on navy, white piping shows every millimetre of drift, every place the cord was stretched going round a curve, and every millimetre the placket went out of parallel when it was buttonholed. Modal is the reason this garment exists and the reason it is difficult. It is a fine, dense knit with a soft hand and a heavy drape, so the shirt falls like a dress rather than clinging like a tee. That same drape means the placket has no support of its own. We fuse a light knit tape down the button stand, insert the piping with the seam in a single pass at a relaxed tension, and work the buttonholes after fusing and before the placket is joined to the body, which is the sequence that keeps the spacing even and the piping parallel. The collar is a notch shape rather than a full lapel: a lapel on a soft jersey rolls open and loses its line within a few wears. It is interfaced with a soft tape and top-stitched 2 mm from the edge, so it holds a defined edge without the stiffness of a woven interlining. Shown in navy with white piping; ground colour, piping shade, body length and sleeve length can all be redeveloped.
Piping on a Drapey Knit — Placket, Collar & Pocket
On a woven shirt the placket carries itself. On modal it does not, and everything about this garment follows from that. The button stand is stabilised with a 12 mm knit-friendly fusible applied before the buttonholes are cut. Without it the stand stretches between the buttons, the piping bows outward between the second and third button, and the front gapes when the wearer sits. With it, the stand stays straight and the shirt still moves with the body. The piping is a fine cotton cord, cut on the bias and inserted with the seam rather than applied afterwards. A two-pass piped edge is faster and always visible on a dark ground: the second pass sits fractionally outside the first and the white line doubles at the corners. Tension is set against a finished sample, not by measurement, because the correct tension changes with the modal weight. The collar is where most piped sleep shirts fail. It is a notch, interfaced with soft tape, top-stitched 2 mm from the edge so the white line follows a defined edge instead of a soft one. The pocket is the last element we sample: it carries piping on the mouth and has to sit square to the placket, so it is positioned from the finished placket rather than from a pattern notch. The hem is curved with a 5 cm side split so the shirt clears the hip when the wearer sits, and the cuff is piped in the same operation as the sleeve seam. Shown in navy; or run it in black, burgundy or ivory with the same trim programme.
- Button stand fused with knit tape before buttonholes, so the piping cannot bow.
- Piping inserted in one pass with the seam, never applied as a second operation.
- Notch collar on soft tape, top-stitched 2 mm from the edge.
- Pocket positioned from the finished placket so it sits square.
- Curved hem with a 5 cm side split so the shirt clears the hip when seated.
- Piped cuff set in the same operation as the sleeve seam.
- Custom fabrics accepted — see our sleepwear fabric library.
Key Features — Why Choose This Piped Modal Sleep Shirt
Modal jersey with a heavy drape, so it falls like a dress rather than clinging.
White piping at collar, placket, pocket and cuff, kept parallel by a fused stand.
Five-button front on a stabilised placket that does not gape.
Notch collar that folds flat instead of rolling open like a lapel.
Mid-thigh length with a curved shirttail hem and side split.
Ground colour, trim shade and body length all redevelopable.
Product Specifications
Ready to Build Your Private Label Sleepwear Line?
Tell us the ground colour and the trim shade you want to pair, and we will come back with modal weights, piping widths and a placement plan for this sleep shirt.
- 加载中···
Request a Quote
- *Phone
- *Title
- *Content





