Custom Men's Hooded Velour Stripe Robes with Tie Belt





| Share | |
|---|---|
| Categories | Men's Robes |
| Brand | KoalaPurr |
| Product Specifications | KP-MS-MR-003 |
| Fabric | Polyester Fleece with Velour Finish |
| Fabric Type | Brushed Knit |
| Pattern | Wide Yarn-Dyed Effect Stripe |
| Color | Navy / Mid Blue / Custom Colors |
| Collar | Hooded Shawl Collar |
| Closure | Self Fabric Tie Belt with Belt Loops |
| Sleeve | Long Sleeve with Turned Cuff |
| Two Front Patch Pockets | |
| Length | Mid-Calf |
| Belt | Self Fabric, Double Looped |
| Fit | Relaxed, Wrap Front |
| MOQ | 100 pcs per color per style |
| Service Type | OEM / ODM / Private Label |
| Season | Autumn / Winter |
Custom Men's Hooded Velour Stripe Dressing Gown with Tie Belt
A wrap dressing gown in a brushed polyester velour carrying a wide two-tone stripe, with a hood built into the shawl collar, a self fabric belt through double loops, two patch pockets and turned cuffs, cut to mid-calf. A pile fabric is where a stripe stops being a print decision and becomes a cutting decision. Velour has a nap, and every panel has to be cut in the same direction or the two blues in the stripe will read as four: one shade on the body, another on the sleeve, a third on the belt. We lay all panels one way up, mark the nap direction on the marker, and cut the belt and pocket bags from the same stripe column as the front so the line runs continuously from shoulder to hem. The stripe itself is wide, roughly 7 cm, which means a body panel carries only five or six repeats and there is no hiding a mismatch. Each front, back and sleeve is cut from a matched column and the side seams are balanced so the stripe meets at the underarm instead of stepping. The hood is the element that decides whether this reads as a robe or a bathrobe. It is cut in two pieces with a centre seam so the stripe follows the crown rather than running sideways across it, and it is set into the shawl collar so the front edges continue the collar line without a break at the neck. Shown in navy and mid blue; stripe width, pile height and ground colours can all be redeveloped.
Nap Direction, Stripe Matching & Hood Construction
Velour is a cut pile, so it has a direction and a shadow. Brush it one way and it looks lighter; turn the panel and the same dye reads darker. That is why the cutting room, not the dyehouse, decides whether a striped velour robe looks expensive. All panels are laid nap-down, in one direction, and the marker carries a nap arrow. The belt, the pocket bags and the hood are cut from the same stripe column as the front panel, so the belt does not come back in the wrong shade of blue after washing. Stripe matching on a 7 cm repeat is done at the side seam and the sleeve head. At this width the eye finds a quarter-stripe drift from two metres away, so seams are pinned to the stripe rather than to the notch, and the sleeve is set so the stripe breaks at the shoulder in a straight line rather than stepping across the armhole. The hood is two pieces with a centre seam, which is what lets the stripe follow the crown. A one-piece hood on a striped fabric forces the stripe to run sideways over the head, and it also wastes fabric on a wide repeat. The hood is joined to the shawl collar so the front edge continues unbroken from hem to hood, and the seam is pressed open on a needle board so the pile is not crushed along the join. The belt runs through two loops set at the side seams, and the belt ends are bar-tacked so they do not fray in the wash. Patch pockets are placed on the stripe rather than centred on the panel, so both pockets look deliberate rather than one looking off. Shown in navy and mid blue; the stripe can be narrowed or recoloured without changing the block.
- All panels cut nap-down in one direction, with the nap arrow on the marker.
- Belt and pocket bags cut from the same stripe column as the front panel.
- Side seams pinned to the stripe, not to the notch.
- Two-piece hood with a centre seam so the stripe follows the crown.
- Hood joined to the shawl collar for an unbroken front edge.
- Seams pressed on a needle board so the pile is not crushed.
- Custom fabrics accepted — see our sleepwear fabric library.
Key Features — Why Choose This Hooded Velour Robe
Brushed velour with a deep pile that holds a two-tone stripe.
Wide 7 cm stripe matched at the side seam and the sleeve head.
Two-piece hood set into the shawl collar for a continuous front edge.
Self fabric belt through double loops, bar-tacked at both ends.
Patch pockets placed on the stripe so the pair looks deliberate.
Stripe width, pile height and ground colours all redevelopable.
Product Specifications
Ready to Build Your Private Label Sleepwear Line?
Send us the stripe width and the two blues you want to pair, and we will come back with pile options, belt constructions and a cutting plan for this robe.
- 加载中···
Request a Quote
- *Phone
- *Title
- *Content


