OEM Forest Green Character Print Pajama Set with Ribbed Cuffs





| Share | |
|---|---|
| Categories | Men's Pajama Sets |
| Brand | KoalaPurr |
| Product Specifications | KP-MS-MPS-012 |
| Fabric | Cotton Jersey |
| Fabric Type | Single Jersey Knit |
| Decoration | Applique with Satin Stitch at Front |
| Pattern | Placement Character / All-over Print Pant |
| Color | Forest Green / Custom Colors |
| Neckline | Crew Neck with Self Fabric Binding |
| Sleeve | Long Sleeve with Ribbed Cuff |
| Bottom | Straight Leg with Ribbed Cuff |
| Waist | Encased Elastic Waistband |
| Top Hem | Ribbed Hem Band |
| Fit | Regular |
| MOQ | 100 pcs per color per style |
| Service Type | OEM / ODM / Private Label |
| Season | Autumn / Winter |
OEM Forest Green Character Print Pajama Set with Ribbed Cuffs
A two-piece set in a forest green cotton jersey: a crew-neck top carrying a large character applique at the centre front, and a straight leg pant in a small allover print of the same motif, both with ribbed cuffs and a ribbed hem band on the top. An applique on a knit is the most demanding decoration in this whole range. The patch has to sit on a fabric that moves, so it is fused first to stabilise the ground, then applied with a dense satin stitch round the outline, then trimmed back. Skip the fusing and the jersey gathers round the patch; pull the satin stitch too tight and the patch cups; stitch it too loose and the edge lifts after three washes. We fuse, then apply in two passes, then press on a padded board so the pile of the jersey is not flattened around the outline. The pant print is deliberately smaller than the placement on the top. A large character on the leg would fight the applique, so the print is a scatter of small motifs at roughly 6 cm repeat, which reads as texture from a distance and as a detail up close. The print and the applique are colour matched in the same lab dip so the set reads as one design rather than two. Both pieces finish with ribbed cuffs, knitted in the same yarn as the body so the colour holds after washing, and the top has a ribbed hem band rather than a straight turn, which is what keeps a jersey top from riding up when the wearer sleeps on their side. Shown in forest green; ground colour, motif scale and cuff depth can all be redeveloped.
Applique on a Knit — Fusing, Stitch Density & Print Scale
The applique is a four-step operation and none of the steps can be skipped. The ground is fused from the back first, because a jersey under a dense satin stitch will otherwise gather and the outline will wave. The patch is then tacked, satin stitched in two passes at the outline, and the surplus trimmed back to the stitch line with a sharp pair of curved scissors. Two passes rather than one is what gives the edge enough cover to survive washing without building a ridge. Stitch density is set against a wash test rather than against the machine setting: too dense and the patch cups away from the body, too open and the edge lifts. The finished patch is pressed on a padded board so the surrounding jersey pile is not crushed into a halo. The pant print is scaled to sit under the applique rather than compete with it. At roughly 6 cm repeat the motif reads as texture at two metres, which is the distance a buyer sees a catalogue image from, and as a detail at arm's length. The print colours are taken from the same lab dip as the applique threads so the two never drift apart between seasons. Rib cuffs on both sleeve and leg are knitted in the same yarn as the body, so there is no shade step after the first wash, and the top's ribbed hem band is set 1 cm narrower than the body so it grips rather than flares. The waist is fully encased elastic with no drawcord. Shown in forest green; motif, print scale and colour all open to change.
- Ground fused from the back before the applique is applied.
- Satin stitch run in two passes, so the outline covers without cupping.
- Patch trimmed back to the stitch line with curved scissors.
- Print scaled at roughly 6 cm repeat so it reads under the applique, not against it.
- Rib cuffs knitted in the same yarn as the body to hold the shade.
- Ribbed hem band set narrower than the body so the top does not ride up.
- Custom fabrics accepted — see our sleepwear fabric library.
Key Features — Why Choose This Character Applique Set
Large character applique fused and satin stitched to survive washing.
Allover print pant scaled small so the two decorations do not compete.
Ribbed cuffs on sleeve and leg, knitted in the same yarn as the body.
Ribbed hem band that keeps the top in place overnight.
Encased elastic waist with no drawcord.
Ground colour, motif scale and cuff depth all redevelopable.
Product Specifications
Ready to Build Your Private Label Sleepwear Line?
Send us the character artwork and the ground colour you want to run, and we will come back with applique options, stitch samples and a print scale plan for this set.
- 加载中···
Request a Quote
- *Phone
- *Title
- *Content






