KoalaPurr is a loungewear manufacturer specializing in custom pajamas, lounge sets, and robes. We support fabric selection and sampling to private label production service.
Home / All / Women's Pajamas / Women's Nightgowns / Custom Women's Pink Toile Cotton Nightgown with Ruffle Sleeve

Custom Women's Pink Toile Cotton Nightgown with Ruffle Sleeve

Custom Women's Pink Toile Cotton Nightgown with Ruffle Sleeve
Custom Women's Pink Toile Cotton Nightgown with Ruffle SleeveCustom Women's Pink Toile Cotton Nightgown with Ruffle SleeveCustom Women's Pink Toile Cotton Nightgown with Ruffle SleeveCustom Women's Pink Toile Cotton Nightgown with Ruffle Sleeve
Share
CategoriesWomen's Nightgowns
BrandKoalaPurr
Product SpecificationsKP-WS-WN-013
FabricPima Cotton
Fabric TypeWoven Poplin
PatternToile Print, All-Over
ColorPink on White / Custom Colors
NecklineSquare Neck with Narrow Binding
SleeveRuffle Flutter Sleeve
LengthAnkle Length
BodyGathered Empire Seam
HemStraight Hem with Deep Turn
FitRelaxed, Full Through the Body
MOQ100 pcs per color per style
Service TypeOEM / ODM / Private Label
SeasonSpring / Summer
Detail Information
Women's pink toile print cotton nightgown with square neck and ruffle flutter sleeves
KoalaPurr · OEM / ODM / Private Label Sleepwear

Custom Women's Pink Toile Cotton Nightgown with Ruffle Sleeve

A long cotton nightgown in a pink toile print, with a square neckline finished in a narrow binding, ruffle flutter sleeves and a gathered empire seam that lets the skirt fall to the ankle. Toile is a landscape print, not a motif print, which makes it the hardest thing to place on a garment with a gathered seam. The scene has to sit level across the front panel, and the panel itself is gathered into the empire seam, so the repeat compresses at the top and opens at the hem. We set the repeat height against the finished skirt length rather than the cut length, because gathering takes up roughly 12 cm of the printed panel and a toile placed for the flat fabric ends up with the figures crowded under the bust. The square neckline is what keeps this from reading as a nightdress for a much older customer. A round or scoop neck on a long skirt goes soft and shapeless; a square neck with a narrow binding holds a line at the chest and gives the flutter sleeve somewhere to sit. The flutter sleeve is cut as a separate ruffle rather than a shaped cap sleeve, so it moves and stays cool - a shaped cap sleeve on a cotton poplin at this length is stiff and adds heat. Shown in pink on white; the engraving, ground colour and skirt length can all be redeveloped.

100 pcs MOQ per color per style
OEM / ODM Full private label support
7-14 Days Sample time
24-30 Days Bulk production time
Close-up of the square neckline binding and pink toile print on the cotton nightgown

Toile Placement on a Gathered Seam & Flutter Sleeve

A toile on a gathered skirt has one problem that no amount of print skill solves by itself: gathering compresses the top of the panel. The repeat is placed against the finished skirt length, and the gather is worked into the printed field rather than into a plain band above it, so the scene continues through the empire seam instead of stopping at it. The front panel is printed as a single field with no centre seam. That costs fabric - roughly 15 percent more per gown than a seamed panel - but it is the only way a landscape print reads as one scene rather than two halves meeting badly. The square neckline is bound with a 12 mm bias strip in the same fabric, top-stitched 1.5 mm from the edge. A square neck has four corners and every one of them is a place the binding can pucker, so each corner is clipped, turned and pressed before the top stitch goes in. The flutter sleeve is a single ruffle cut on the cross grain, gathered at 1.4:1 and attached under the neckline binding so no extra seam shows across the shoulder. A lower ratio reads as a flat frill; a higher one makes it stick out like a costume wing. The hem is a deep 4 cm turn so the gown has weight at the bottom and does not billow. Shown in pink on white; print scale, neckline shape and skirt length are open to change.

  • Repeat placed against finished skirt length, not cut length, so gathering does not crowd the scene.
  • Front panel printed as one field with no centre seam, at about 15% more fabric.
  • Square neck bound in 12 mm bias with all four corners clipped and pressed.
  • Flutter sleeve is a separate ruffle on the cross grain, gathered 1.4:1.
  • Sleeve attached under the neck binding so no seam crosses the shoulder.
  • Deep 4 cm hem turn gives the skirt weight at the bottom.
  • Custom fabrics accepted — see our sleepwear fabric library.

Key Features — Why Choose This Toile Cotton Nightgown

Pima cotton poplin woven for a smooth, cool hand at ankle length.

Toile repeat placed for the finished skirt so the scene reads as one engraving.

Square neckline that holds a line instead of going soft.

Ruffle flutter sleeve that moves and adds no heat.

Empire gather worked into the printed field, not above it.

Print scale, neckline and skirt length all redevelopable.

Product Specifications

Product Type Women's Cotton Nightgown
Fabric Pima Cotton
Fabric Type Woven Poplin
Pattern Toile, All-Over Print
Colour Pink on White
Neckline Square with Narrow Binding
Sleeve Ruffle Flutter
Length Ankle Length
Size Range XS - XXL / Custom Sizing
Develop this pink toile cotton nightgown for your own label

Ready to Build Your Private Label Sleepwear Line?

Send us the engraving you want to work from and the ground colour, and we will come back with poplin weights, placement plans and a sampling schedule for this gown.

Review
  • 加载中···

Request a Quote

Complete the form below and our sales team will contact you within 24 hours.
*Email
*Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.