Private Label Men's Heather Grey Modal Pajama Set with Piping





| Share | |
|---|---|
| Categories | Men's Pajama Sets |
| Brand | KoalaPurr |
| Product Specifications | KP-MS-MPS-014 |
| Fabric | Modal Jersey |
| Fabric Type | Single Jersey Knit |
| Pattern | Heather Yarn Effect |
| Color | Heather Grey / Custom Colors |
| Collar | Notch Collar with White Piping |
| Closure | Four-Button Front |
| Sleeve | Long Sleeve with Piped Cuff |
| No Chest Pocket | |
| Bottom | Straight Leg Pants |
| Waist | Encased Elastic with Flat Drawstring |
| Fit | Relaxed |
| MOQ | 100 pcs per color per style |
| Service Type | OEM / ODM / Private Label |
| Season | All Season |
Private Label Men's Heather Grey Modal Pajama Set with Piping
A men's shirt and pant set in a heather grey modal jersey, with a notch collar outlined in white piping, a four-button front, piped cuffs and straight leg pants on an elastic waist with a flat drawstring. Heather grey and white piping is the quietest possible specification, which is also why it is the hardest to sell as a sample: there is no print to hide behind and no colour to carry the eye, so the piping line is the entire design. It runs the collar edge, down both sides of the placket and round the cuff, and any wobble at the collar point or any drift down the placket is immediately visible on a pale ground. The piping is a fine white cotton cord inserted with the seam in a single pass. The collar is interfaced on soft tape and top-stitched 2 mm from the edge so the white line follows a defined edge, and the placket is fused before the buttonholes are worked, so the piping stays parallel instead of being pulled out of line when the stand stretches. The heather is a yarn effect rather than a print: two shades of modal are spun together, which is why the shade is never completely flat and why it hides a crease better than a solid grey. It also means the fabric is piece-dyed in the yarn, so there is no print lot to match and no surface ink to crack. The pant carries a flat drawstring through a buttonholed casing with elastic behind it, so the cord adjusts the fit and the elastic holds it, and there is no chest pocket, which keeps the front of the shirt as clean as the specification implies. Shown in heather grey with white piping; ground shade, trim colour and cuff style can all be redeveloped.
Piping on a Pale Ground & Drawstring Waist
On a pale heather the piping has nowhere to hide, so the sequence matters more than the technique. The collar is cut, interfaced on soft tape and piped in one operation; the placket is fused, buttonholed, then joined to the body; the piping is inserted with the seam rather than applied afterwards, because a second pass sits fractionally outside the first and the white line doubles at the collar point, which is exactly where a buyer looks. The top-stitch is 2 mm from the edge and runs continuously from the collar point to the hem. Any interruption reads as a mistake on a pale ground, so the stitch is planned as one pass per side rather than broken at the collar join. The waist is a buttonholed casing with a flat drawstring and a 3 cm elastic behind it. The drawstring is flat rather than round because a round cord on a modal waistband rolls and twists in the wash, and it is bar-tacked at both ends so it cannot pull through. The casing is stitched through at the centre back so the elastic cannot rotate inside it. The cuff is piped in the same operation as the sleeve seam, and the pant hem is a plain 2.5 cm turn so the piping at the cuff is the only trimmed edge on the lower half. Modal is chosen for the hand: it drapes and it breathes, and it takes a white piping without the cord printing through the surface.
- Piping inserted with the seam in one pass at collar, placket and cuff.
- Collar interfaced on soft tape and top-stitched 2 mm from the edge.
- Placket fused before buttonholing so the piping stays parallel.
- Top-stitch planned as one continuous pass per side, not broken at the join.
- Flat drawstring, bar-tacked at both ends, over a 3 cm elastic.
- Casing stitched through at centre back so the elastic cannot rotate.
- Custom fabrics accepted — see our sleepwear fabric library.
Key Features — Why Choose This Heather Modal Set
Heather modal jersey, spun in two shades rather than printed.
White piping at collar, placket and cuff, kept parallel by a fused stand.
Notch collar on soft tape with a continuous 2 mm top-stitch.
Flat drawstring over elastic, bar-tacked so it cannot pull through.
Clean front with no chest pocket, keeping the piping line uninterrupted.
Ground shade, trim colour and cuff style all redevelopable.
Product Specifications
Ready to Build Your Private Label Sleepwear Line?
Send us the ground shade and the trim colour you want to pair, and we will come back with modal weights, piping widths and a cuff plan for this set.
- 加载中···
Request a Quote
- *Phone
- *Title
- *Content






